INSTALL AND CONFIGURE STATISTICS FOR LOAD BALANCED IIS SITES-
Ingredients-
* In this scenario I’m going to use the following things-
# 3 NLB nodes – 2K31 (IP- 192.168.1.129), 2K32 (IP- 192.168.1.130), 2K33 (IP- 192.168.1.131)
# A server for stats installation – 2K34 (IP- 192.168.1.132)
# Statistics – AWStats (download from http://awstats.sourceforge.net). I used AWStats 6.8 version.
# Website for testing – www.a-r-u-n.com (must be setup in all the above 3 NLB nodes)
# Stats website in 2K34. I’m going to use server’s IP itself for testing.
Preparation-
1. Install AWStats 6.8 in the server 2K34 in the following location – C:\AWStats.
2. During installation it prompts you to specify the location of apache installation. Specify ‘none’ since this one is for IIS-
—–> Running OS detected: Windows
—–> Check for web server install
awstats_configure did not find your Apache web main runtime.
Please, enter full directory path of your Apache web server or ‘none’ to skip this step if you don’t have local web server or don’t have permission to change its setup.
Example: c:\Program files\apache group\apache
Apache Web server path (‘none’ to skip):
> none
3. Next step is it will ask to create a new config file for website, specify ‘y’-
—–> Need to create a new config file ?
Do you want me to build a new AWStats config/profile
file (required if first install) [y/N] ? y
4. It then asks you to specify the name of the website for config file. Specify the website name-
—–> Define config file name to create
What is the name of your web site or profile analysis ?
Example: www.mysite.com
Example: demo
Your web site, virtual server or profile name:
> a-r-u-n.com
5. Press Enter to complete the installation of AWStats.
6. Create the data directory called ‘Data’ under the following location C:\AWStats\ and assign modify permission to the following objects – Network Service, web user(IUSR).
7. Now open the config file ‘awstats.a-r-u-n.com.conf’ located under ‘cgi-bin’ folder (in my case – C:\AWStats\wwwroot\cgi-bin).
8. Search for ‘LogFile’ section. You need to specify the path where log files are created for the website.
Note – Since this configuration is for websites hosted in Load Balanced servers the format for ‘LogFile’ differs from the usual log format. There are two options available to generate logs for websites-
a. Copy all the log files from log folders of a-r-u-n.com from all the 3 nodes to the location in local server. In this case, I copied from \\2K31\C$\Domains\a-r-u-n.com\logs\W3SVC100\*.log to C:\Logs\a-r-u-n.com\2K31\*.log for 1st node. \\2K32\C$\Domains\a-r-u-n.com\logs\W3SVC190\*.log to C:\Logs\a-r-u-n.com\2K32\*.log for 2nd node. And \\2K33\C$\Domains\a-r-u-n.com\logs\W3SVC150\*.log to C:\Logs\a-r-u-n.com\2K33\*.log for 3rd node. Now all the 3 nodes’ log files for a-r-u-n.com have been copied to the location in local server – C:\Logs\a-r-u-n.com\ in 2K34. Now we need to merge all the above 3 nodes’ log files into one file using a perl tool called logresolvemerge.pl which ships with AWStats installation. This can be found in C:\AWStats\tools\logresolvemerge.pl. To merge all the log files to a single file, perform these steps-
1. Goto command prompt and to C:\AWStats\tools\ and type the following command –
perl logresolvemerge.pl C:\Logs\a-r-u-n.com\2K31\ex*.log C:\Logs\a-r-u-n.com\2K32\ex*.log C:\Logs\a-r-u-n.com\2K33\ex*.log > C:\Logs\a-r-u-n.com\all.log
2. Now you will see all the nodes’ log files have been merged to a single log file at C:\Logs\a-r-u-n.com\all.log
3. Now specify this log file path ‘C:\Logs\a-r-u-n.com\all.log’ under the ‘LogFile’ section in ‘awstats.a-r-u-n.com.conf’. This will looks like-
LogFile=”C:/Logs/a-r-u-n.com/all.log”
b. Second option is to specify UNC share path in config file. Note down the UNC share path of all the nodes for a-r-u-n.com (\\2k31\C$\Domains, \\2k32\C$\Domains and \\2k33\C$\Domains). Create a map networked drive for the above UNC shares. Say ‘G’ drive mapped to \\2k31\C$\Domains and ‘H’ drive mapped to \\2k32\C$\Domains and ‘I’ drive mapped to \\2k33\C$\Domains respectively. Now you can access those log files directly by G:\a-r-u-n.com\logs\W3SVC100\*.log for 2K31 server and H:\a-r-u-n.com\.. for 2K32 server and so on. Now open the config file ‘awstats.a-r-u-n.com.conf’ and look for ‘LogFile’ section. Specify the following-
LogFile=”perl C:/AWStats/tools/logresolvemerge.pl G:/a-r-u-n.com/logs/W3SVC100/ex*.log H:/a-r-u-n.com/logs/W3SVC190/ex*.log I:/arun1.com/log/W3SVC150/ex*.log |”
By specifying the above format in config file of a-r-u-n.com AWStats generates stats automatically during update the process. This is most suited in the environment where the log files are too large and you need to save space. Also this is time saver.
o Note – First option is time consuming and requires human intervention for exporting each and every logs. Where as second option is easier and can be specified only in config file and stats generation is automated during rebuild process.
9. Now you need to specify the log format for your website. Simply copy the format to config file from the top of the web log file(exmmddyy.log) if you not sure about the exact LogFormat of your web sites. (Note – Websites in each nodes must have same ‘Logging options’ enabled in IIS, this can be confirmed by right clicking web site properties > Logging Properties > in General and Advanced tab make sure that particular website in all the nodes have same settings)-
#Software: Microsoft Internet Information Services 6.0
#Version: 1.0
#Date: 2010-08-31 14:39:06
#Fields: date time s-sitename s-computername s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs-version cs(User-Agent) cs(Cookie) cs(Referer) cs-host sc-status sc-substatus sc-win32-status sc-bytes cs-bytes time-taken
Copy the fields so that it looks like this-
LogFormat= “date time s-sitename s-computername s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs-version cs(User-Agent) cs(Cookie) cs(Referer) cs-host sc-status sc-substatus sc-win32-status sc-bytes cs-bytes time-taken”
10. Please specify DirData path in ‘DirData’ section as C:\AWStats\Data which you created in step 6 so that AWStats will store the result of stats analysis in AWStats files.
11. Now you need to update the stats in order to view it as GUI from web browser. To do this goto command prompt to the location – C:\AWStats\wwwroot\cgi-bin and key in the following command-
perl awstats.pl -config=www.a-r-u-n.com –update
You will see the result like this-
C:\AWStats\wwwroot\cgi-bin>perl awstats.pl -config=www.a-r-u-n.com -update
Create/Update database for config “./awstats.www.a-r-u-n.com.conf” by AWStats version 6.8 (build 1.910)
From data in log file “perl C:/AWStats/tools/logresolvemerge.pl G:/a-r-u-n.com/logs/W3SVC100/ex*.log H:/a-r-u-n.com/logs/W3SVC190/ex*.log I:/arun1.com/log/W3SVC150/ex*.log |”…
Phase 1 : First bypass old records, searching new record…
Searching new records from beginning of log file…
Phase 2 : Now process new records (Flush history on disk after 20000 hosts)…
Jumped lines in file: 0
Parsed lines in file: 1560
Found 43 dropped records,
Found 0 corrupted records,
Found 197 old records,
Found 1320 new qualified records.
Make sure you see new qualified records at the end. If there’s any problem or error please verify you have followed previous steps correctly.
12. Stats have been generated for your website. Now we need URL to view the generated stats. Please create a website in IIS mapped to AWStats ‘cgi-bin’ directory (ie, C:\AWStats\wwwroot\cgi-bin).
13. Call the website from browser – http://192.168.1.132/awstats.pl?config=a-r-u-n.com
14. You are almost done. To generate stats automatically on daily or hourly basis you need to automate it by using Windows Scheduled Tasks. Create a batch file under cgi-bin folder of AWStats and specify the following command – perl awstats.pl -config=www.a-r-u-n.com –update
And finally create a scheduled task to schedule the batch file every 6 hrs or 12 hours.
15. Add sugar to taste… sorry add websites. 
…Configuring NLB for websites with dedicated ip addresses
# Assuming NLB is already setup and the nodes are converged fine.
Ingredients-
Following are the things I planned for my NLB (Network Load Balancing) setup in Windows Server 2003-
# 3 machines for web server(IIS installed) – Windows Server 2003
Machine names and its IP addresses-
2K31 - 192.168.1.129
2K32 - 192.168.1.130
2K33 - 192.168.1.131
# 1 machine for DNS server – Windows Server 2003
2K34 – 192.168.1.132
# Cluster IP addresses (for dedicated IP) – 192.168.1.150(for arun1.com), 192.168.1.151(for arun2.com)
# Website name that is going to use in dedicated IP configuration – arun1.com, arun2.com
# On each web servers create the folder structures as below-
C:\Domains
C:\Domains\arun1.com
C:\Domains\arun1.com\wwwroot
C:\Domains
C:\Domains\arun2.com
C:\Domains\arun2.com\wwwroot
Create a test page “index.html” under wwwroot and copy paste the below code-
<html>
<h1><center>WELCOME TO ARUN WORLD</center></h1>
<b/>
2K31 – arun1.com – dedicated
</html>
Change the domain name arun1.com and server name ‘Hosted in 2K31’ to appropriate domain name and server’s name on each sever as this will help a bit in the later stage during testing of each nodes as which node is servicing the request.
Note – It is not intention to have separate physical machines to configure NLB. You can either configure it in Virtual servers like – Microsoft Virtual PC, VMWare Workstation or VMWare Server. This saves cost. In this scenario I’ve setup servers in my friend’s laptop with this configs-
VMWare Workstation ACE Edition 6.02
1.73 Ghz Intel Dual Core
1 GB RAM
120 GB HD
Preparation-
In Network Load Balancing Manager-
1. Open ‘Cluster Properties’ of the cluster nlb.arun.com.
2. In ‘Cluster IP Address’ click ‘Add’ to add new dedicated IP. In this case I’ve added 192.168.1.150 and 192.168.1.151
3. You will be presented with a dialog box “Confirm Change of Cluster-wide
Properties”. Click ‘Yes’ to proceed further.
In IIS Manager-
Setup 2 sites arun1.com host header pointing to the ip 192.168.1.150 and arun2.com host header pointing to the ip 192.168.1.151.
In DNS Management console-
Create forward lookup zone for 2 domains – arun1.com(192.168.1.150) and arun2.com(192.168.1.151)-
Testing-
Now open the browser and type http://arun1.com and you will see something like this-
In the above pic, it is serviced by node 1 – 2K31.
To test whether this site is servicing through other nodes please suspend or stop the 2K31 node in Cluster Manager(Please refer this URL Setup Network Load Balancing in Windows Server 2003 see under ‘Testing’ section)
Happy Load Balancing! 
“`*“`arun …
Setup Network Load Balancing in Windows Server 2003
Generally you will need atleast 2 machines installed with Windows Server 2003 and each machine should have atleast 1 NIC and 1 static IP address. Additionally, you will need one more machine (either Windows Server 2003 or Windows XP) needed in order to test the setup. Assuming DNS server is included to add DNS records for websites.
Ingredients-
Following are the things I planned for my NLB (Network Load Balancing) setup in Windows Server 2003-
# 3 machines for web server(IIS installed) – Windows Server 2003
Machine names and its IP addresses-
2K31 - 192.168.1.129
2K32 - 192.168.1.130
2K33 - 192.168.1.131
# 1 machine for DNS server – Windows Server 2003
2K34 – 192.168.1.132
# Cluster IP address – 192.168.1.100
# Cluster Name – nlb.arun.com
# On each web servers create the folder structures as below-¦lt;br /> C:\Domains
C:\Domains\nlb.arun.com
C:\Domains\nlb.arun.com\wwwroot
¦lt;br /> Create a test page “index.html” under wwwroot and copy paste the below code-
<html>
<h1><center>WELCOME TO ARUN WORLD</center></h1>
<b/>
Hosted in 2K31
</html>
Change the server name ‘Hosted in 2K31’ to appropriate server’s name on each sever as this will help a bit in the later stage during testing of each nodes as which node is servicing the request.
Note – It is not intention to have separate physical machines to configure NLB. You can either configure it in Virtual servers like – Microsoft Virtual PC, VMWare Workstation or VMWare Server. This saves cost. In this scenario I’ve setup servers in my friend’s laptop with this configs-
VMWare Workstation ACE Edition 6.02
1.73 Ghz Intel Dual Core
1 GB RAM
120 GB HD
Preparation-
Setting up Network Load Balancer-
1. Open Network Load balancing Manager-
Start > Administrative Tools > Network Load balancing Manager
(or)
Start > Run > type ‘nlbmgr’
2. Right click Network Load Balancing Manager > New Cluster
3. In ‘Cluster Parameters’ wizard, in ‘Cluster IP Configuration’ specify the cluster IP address – 192.168.1.100, subnet mask and Full Internet Name as ‘nlb.arun.com’. Ensure ‘Multicast’ option is selected along with ‘IGMP Multicast’.
Leave the ‘Allow Remote Control’ unchecked.
Note – IP address is the virtual IP address for the cluster that will be used to address the cluster. If you have single adapter then you should select ‘Multicast’ in ‘Cluster Operation Mode’. By selecting ‘Unicast’ allows NLB to take over the network card it is bound to and doesn’t allow any additional network traffic through it. You can configure single adapter in ‘Unicast’ mode but after configuration the cluster manager will not be able to communicate with the server. Generally, ‘Multicast’ is slower than ‘Unicast’ mode.
4. On the next wizard ‘Cluster IP addresses’, leave the settings as it is and click next. (We will visit this in next topic).
5. In ‘Port Rules’ wizard, ensure the necessary ports are added. By default NLB configures to handle all ports. In this scenario I’m going to add these ports – 80 (http traffic) and 443 (https traffic). Add the ports by hitting ‘Add’ button and input 80 as From and To in Port range. Ensure ‘Both’ (ie, both TCP and UDP) protocol is selected.
One of the important thing here is ‘Filtering Mode’ which determines affinity of requests. Affinity describes how requests are routed to a specific server. ‘None’ refers any servers can service the incoming requests. ‘Single’ refers to a specific server has to handle each and every requests from a given IP. ‘None’ is recommended as it is better in stateless applications and this results in less overhead in NLB. ‘Single’ mode should be used when there’s a state server connection, for example – SSL.
Do the same thing for adding port 443.
6. Next step is to add nodes to the cluster. In the ‘Connect’ wizard specify the host name which needs to be included in NLB. In this case I specified 2K31 in ‘Host’ (or you can specify IP address of the host, for this server – 192.168.1.129) and click ‘Connect’ button and ensure interface name and IP info of that node are listed. If there’s more than one NIC card select the one that is going to be configured for NLB.
7. In ‘Host Parameters’ wizard specify the Priority. This should be unique number and it identifies each node in the cluster. Lower the number the higher the priority. Priority 1 is the master node which receives requests and routes the traffic to other nodes only when the load in this node is high. Hit ‘Finish’.
8. This will take 25 – 35 secs for a node to get converged. Following is the status of NLB cluster-
9. Follow the above steps (6th and 7th) to add remaining nodes-
2K32 - 192.168.1.130
2K33 - 192.168.1.131 Review the error log in the bottom pane if there is rror during additional node setup. Wait for few seconds and hit refresh until you see all the nodes becomes ‘Converged’ state.
One of the other ways to determine the status of each node in the cluster is – Goto command prompt in one of the nodes > type wlbs query
You will see something like this if all nodes are converged-
In this picture I tried in 2K33 (3rd node).
Setting up website to test NLB-
Setup website in node 1 – 2K31 – Setting up a website is easy process – Open IIS Manager from Administrative Tools and create a new website called nlb.arun.com as host header mapped to the ip address 192.168.1.100 (Cluster IP). Please setup the same site with same settings in all other nodes (2K32, 2K33).
Setting up DNS records-
This should be carried out in DNS server 2K34 which is not a part of cluster and just acts as DNS server. In order to get a website working you need DNS record configured for that website. To do this you need to create DNS record for arun.com as shown in this picture. Create host record (A) for nlb.arun.com pointing to the cluster IP – 192.168.1.100-
Testing-
Now open the browser and type http://nlb.arun.com and you will see something like this-
In the above pic, it is serviced by node 1 – 2K31To test whether this site is servicing through other nodes please suspend or stop the 2K31 node in Cluster Manager.
Access the site http://nlb.arun.com again after suspending node 1.
Now you will see the request is serviced by 2K32 (node 2). This confirms request is routed to another node when the first node is unreachable. Now resume/start the node which you stopped in previous stage.
Happy Load Balancing!
“`*“`arun …
Bride and bridegroom’s SQL queries-
Wedding Query in SQL Style -
HUSBAND’S QUERY-
CREATE PROCEDURE MyMarriage (
BrideGroom Male (25) ,
Bride Female(20) )
AS
BEGIN
SELECT Bride FROM india_ Brides
WHERE FatherInLaw = ‘Millionaire’
AND Count(Car) > 20 AND HouseStatus =’ThreeStoreyed’
AND BrideEduStatus IN (B.TECH ,BE ,Degree ,MCA ,MiBA) AND Having Brothers= Null
AND Sisters =Null
SELECT Gold ,Cash ,Car ,BankBalance
FROM FatherInLaw
UPDATE MyBankAccout
SETMyBal = MyBal + FatherInLawBal
UPDATEMyLocker
SET MyLockerContents = MyLockerContents + FatherInLawGold
INSERT INTOMyCarShed VALUES(‘BMW’)
END
GO
Then the wife writes the below query:
DROP HUSBAND;
Commit;
“`*“`arun …
One of the nice mail I received-
Bill Gates organized an enormous session to recruit a new Chairman for Microsoft Europe. 5000 candidates assembled in a large room. One candidate is our ramasamy.
Bill Gates: Thank you for coming.
Those who do not know JAVA may leave.
2000 people leave the room.
Ramasamy says to himself,
‘I do not know JAVA, but I have nothing to lose if I stay. I’ll give it a try !’
Bill Gates: Candidates who never had experience of managing more
than 100 people may leave.
2000 people leave the room.
Ramasamy says to himself
‘I never managed anybody by myself, but I have nothing to lose if I stay. What can
happen to me ?’ So he stays.
Bill Gates: Candidates who do not have management diplomas may leave.
500 people leave the room.
Ramasamy says to himself,
‘I left school at 15, but what have I got to lose ?’ So he stays in the room.
Lastly, Bill Gates asked the candidates who do not speak Serbo-Croat
to leave.
498 people leave the room.
Ramasamy says to himself,
‘I do not speak one word of Serbo-Croat but what do I have to lose ?’ So he stays
and finds himself with one other candidate; Everyone else has gone.
Bill Gates joined them and said ‘Apparently you are the only two candidates who speak Serbo-Croat, so I’d now like to hear you have a conversation together in that language.’
Calmly, ramasamy turns to the other candidate and says ‘ Endha ooru ? ‘
The other candidate answers, ‘ Thoothukudi pakkam, Neenga??!!!!! ‘
Madurai…. Tamilians rock.
“`*“`arun …
Eleven point something-
1. If time doesn’t wait for you don’t worry! Just remove the damn battery from the clock and Enjoy life!
2. Expecting the world to treat u fairly coz u r a good person is like expecting the lion not to attack u coz u r a vegetarian! Think about it.
3. Beauty isn’t measured by outer appearance and what clothes we wear,but what we are inside. So, try going out naked tomorrow and see the admiration!! !!
4. Don’t walk as if you rule the world,walk as if you don’t care who rules the world! That’s called Attitude…! Keep on rocking!
5. Every lady hopes that her daughter will marry a better man than she did and is convinced that her son will never find a wife as good as his father did!!!
6. He was a good man. He never smoked or drank, had no affair. When he died, the insurance company refused the claim. They said, he who never lived, cannot die!
7. A man threw his wife in a pond of Crocodiles? He’s now being harassed by the Animal Rights Activists for being cruel to the Crocodiles!
8. So many options for suicide: Poison, sleeping pills, hanging,jumping from a building, lying on train tracks, but we chose Marriage, slow death for sure!
9. Only 20 percent boys have brains, rest have girlfriends!
10. All desirable things in life are either illegal, banned, expensive or married to someone else!
11. 10% of road accidents are due to drunken driving. Which makes it a logical statement that 90% of accidents are due to driving without drinking!
…How to repair suspected mssql database-
When you connect your MSSQL server you may notice some database(s) in ‘suspected’ mode and it doesn’t let you do anything. This is happening because of database corruption, server not properly shut down, etc.. To repair the ‘suspected’ database you may need to run the following query in your Query Analyzer(for SQL 2000) or Management Studio (for SQL 2005 and 2008)-
EXEC sp_resetstatus databasenamehere;
ALTER DATABASE databasenamehere SET EMERGENCY
DBCC checkdb(databasenamehere)
ALTER DATABASE databasenamehere SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DBCC CheckDB (databasenamehere, REPAIR_ALLOW_DATA_LOSS)
ALTER DATABASE databasenamehere SET MULTI_USER
Note: Before running the query please make sure you have taken the copy of data and transaction log files to another location.
Your database is repaired now
…
Wishing you and your family a Happy Christmas!
…
Hard drive weight increasing
Something funny, just check it out
Click the image to enlarge-
“`*“`arun
…Volkswagon’s Beetle
I like this super car(that’s what I call it) since my childhood for its buggy design and childish look. If I were asked to draw a car, two things comes to my mind – Maruti 800 and this bug(beetle). Next to Maruti 800 this dream car has been in my wish list. However, the production for beetle was stopped in the middle. Now this super car Volkswagon’s Beetle is out on the indian roads. Actually this bug is manufactured in a plant located in Mexico and exported worldwide. Now Volkswagon has invested to setup a production unit in Maharastra for it’s indian customers. This new bug models includes convertible. The main drawback of this car is it’s pricing. Yes, it’s bit costlier. Price ranging from Rs. 14 to 21 Lakhs.
Enjoy!
…If you receive this error when accessing Kayako SupportSuite-
Parse error: syntax error, unexpected ‘{‘ in support\includes\SmartyLight\class.template.php on line 351
Please make sure ‘short_open_tag‘ is set to ‘On‘ in php.ini this will fix the problem.
…Its long though but very touching!!!! Read it when u have free time… Thanks to my friend who forwarded this mail
My name is Amisha, Amisha Bhatnagar. I am 31 years old born and brought up in Mumbai. I have done my PhD. in psychology but currently, I am a housewife. I love painting, music, cooking etc and etc. No. this isn’t an excerpt from my curriculum vitae but an excerpt from my life. An incident that changed my life forever.
I was married to Rohan Bhatnagar for almost seven years. We have a kid who’s three year old. And I am a happy to do house wife, with god’s grace, as I have a loving husband and the apple of my eyes, my small kid.
Born and brought up in Mumbai, I had to travel all this way from the west coast of Arabian to this beach stretch on the Bay of Bengal as my husband is based in Chennai.
Except for the scorching heat of Mr. Helios in the summer, I very much like this place. Classes and masses apart, Chennai reflects a unique blend of cultures and traditions just like Mumbai.
We stay in an apartment near the Besant Nagar beach. And we have made it a habit to take a stroll along the beach every morning. As usual we were sauntering with the wet sand touching our senses, Chinnu (that’s how I address my kid as) came running to me shouting under that childish delight when you find something odd or strange.
“Momma, look what I have found,” he was spoke with the kiddy accent, stressing the ‘m’ from Momma and ‘k’ from look. I embosomed him with my arms and took the odd thing in my hands. It was a bottle, a corked bottle with a letter inside it.
I hail from a very orthodox family. My mom and dad were liberal, in the sense that they allowed me to study till this point, considering the orthodoxy of my ancestors.
“Boys flirt a lot. I am not saying all boys are bad, but most of them are. Even if you are confronted by Mr. Right, he may be of a different caste and you will bring disgrace to your family, your very own dad and mom who loved you so much and brought you up,” my mom was always skeptical about me having male friends. And true to their expectations I never even looked at a guy, in fact never spoken to anyone else from outside.
Call me narrow-minded or immature or whatever. For me, my parents are everything. They are my world. Juts for the sake of something called love, I can’t wreak havoc in my beautiful family. Of course many of my friends as well as you may beg to differ with me. But you can’t make me shift preferences or my way of thinking.
I was doing my PhD in psychology at Bhavan’s in Mumbai. There was this certain guy who used to follow me, everyday to my home whenever it was late at night. Initially I thought somebody was trying to stalk me, but later on I came to know that he was kinda protecting me.
Of all jobs in this world, I thought he was jobless to follow me around and save me. But still I never hated him. I admired him, for he liked me and yet he never spoke to me. There were days when I walked along the deserted roads of Juhu beach road in the wake of midnight under the cover of the moon. But I never felt I was lonely or insecure, thanks to that guy.
All these days I have been so selfish. Probably he’s thinking that one day I might yield to his sincerity or whatsoever. One fine day, it was late at night as usual I was walking down the road when he followed me. I stopped and looked behind and gave him an angry stare that would have reduced him to ashes. But somehow he survived and perhaps he understood the meaning of that stare.
He stopped following me.
Every night I walked down these roads of Mumbai from Juhu to my home, my eyes involuntarily groped for him quite inexplicably.
Nobody can understand the depth of a woman’s convoluted mind. As long as some one follows you or loves you, we neglect him and once he’s away we know how much he meant for us.
And one day, all of a sudden, from nowhere he appeared before me and said this in a low voice, “Hi Amisha, I have known you since the time you are in college. That’s more than four and half years from now. I loved you at first sight. But had I told you at that time, you wouldn’t have believed me. And so I took my time to realize whether it’s true love or not…” and he paused for a while.
“I love you…” he finished.
God!!! I never expected this from him, I thought with that girlish meanness. I never thought he’s like every one else, every other guy on the streets. What all impression I had about him seemed to have vanished into thin air. The idolatrousness for him doesn’t exist anymore.
What big mistake did he make? He just proposed me. He hasn’t committed any heinous crime after all. But why I think this way? Perhaps the milieu enwombing me under which I was brought up. Or ….
I never said ‘Yes’ and at the same time, I never said a ‘NO’. Perhaps that meant a probable affirmation to him that he proposed three more times.
And the last time I met him, I said, “Look, I don’t know anything about you. You are a perfect stranger. Even if you were friends, I wouldn’t have loved you perhaps. Even if I loved you, my parents would anyways reject this love and of course me too. I know you have wasted so much precious time of yours. Don’t any more. Please ….” I stood in front of him with my hands clasped close as if I were praying, in fact urging him.
It was an earnest request. I should have told him the same long back. Nevertheless, it’s not too late for anything.
He just gave me a smile. A smile which probably meant ‘Do you know what love means or do you know what it feels like to love or to be loved?’
“Ok. Forget all these things, can you atleast prove that you love me? More than anyone else in this world, even more than my parents?”
He was quiet for some time. He looked around and then picked up a bottle. He wrote a letter, and then pushed the letter into the bottle and flung it far into the sea.
“The message will reach you, and then you will understand how much….” he stopped.
That was the last time I ever saw him again.
Then I was married to Rohan.
And today Chinnu found a bottle with a message in it, which read, “I love you…. Chikku” (Chikku, that’s how he used to call me)
My feet trembled and the whole world shattered right infront of me. Thousands of miles, the bottle travelled and reaching its destination might not be a fluke or a mere coincidence. It’s just love, pure love. Probably the greatest of them all. Tears inadvertently cascaded down my cheeks. He loved me so much? I asked myself….
I am proud to have been loved by a great man who proved his love. And at the same time, I missed him. I missed him so much and all for a bottle of love.
“I love you too” I replied to that letter and signed Chikku and sealed it in the same bottle and flung it far into the sea.
Life has to go on. And I am already married. But perhaps I will never forget my paramour throughout my life.
My name is Amisha, and this is my story, a story worth the pages in my diary called life….!
…If you receive the following error after you try to delete or create a domain from helm or Restore from HelmRestoreTool-
2009-09-10 10:24:33 Website.IWeb_RemoveHostHeader 0-2147467259: Unknown error while adding host header: A name contained an invalid character.
{0}
2009-09-10 10:24:33 CDomainAlias.DeleteEx 0-2147467259: Unknown error while adding host header: A name contained an invalid character.
{0}
2009-09-10 10:24:33 CDomain.DeleteDomainEx 0-2147467259: Unknown error while adding host header: A name contained an invalid character.
{0}2009-09-10 10:40:14 Website.IWeb_RemoveHostHeader 0-2147467259: Unknown error while adding host header: A name contained an invalid character.
{0}
2009-09-10 10:40:14 CDomainAlias.DeleteEx 0-2147467259: Unknown error while adding host header: A name contained an invalid character.{0}
2009-09-10 10:59:22 Website.IWeb_AddWebsite 0-2147467259: Unknown error while creating site: A name contained an invalid character.
{0}
2009-09-10 10:59:22 CWebsite.RepairWebsiteEx 0-2147467259: Unknown error while creating site: A name contained an invalid character.
{0}
Solution – In the remote server where the site is hosted please goto C:\Helm.config\ and delete IIS.xml file. Now try to delete the domain from helm you will be able to delete successfully.
…
MySQL command line administration-
1. Login to server-
Goto MySQL installed location through command prompt-
C:\MySQL\bin
or
C:\Program files\MySQL\bin
Specify MySQL user and password -
C:\MySQl\bin> mysql -u root -p
Above command is used to login to local MySQL server. If you want to login to remote MySQL server use this command
C:\MySQl\bin> mysql -h <specify-remote-mysql-server-name-or-ip> -u root -p
2. List all the databases in MySQL server-
mysql> show databases;
3. Create new database in MySQL server-
mysql> create database <specify-db-name-here>;
4. Create a table in a database-
create table `<specify-table-name-here>` (`field1` type , `field2` type);
For example- To create a table ‘fortest’ with 3 fields – testid, testname, testemail-
mysql> create table `fortest` (`testid` int( 11 ) not null auto_increment , `testname` varchar( 50 ) not null , `testemail` varchar( 100 ) not null , primary key ( `testid` ));
5. To access a particular database in MySQL server-
mysql> use <specify-db-name-here>;
for example-
mysql> use test;
6. To view all the tables in that particular database-
mysql> show tables;
7. To view that particular database’s table field format-
mysql> desc <specify-table-name-here>;
for example-
mysql> desc fortest;
8. To access all the contents in a table-
mysql> select * from <specify-table-name-here>;
for example-
mysql> select * from fortest;
9. To retrieve specific info from particular table-
mysql> select * from <specify-table-name-here> where <specify-field-name-here> = ‘any-info’;
for example – if you want to find the details of a person named ‘arun’ from the table ‘fortest’ -
mysql> select * from fortest where testname = ‘arun’;
10. To create user in MySQL server-
mysql> create user <specify-user-name-here> identified by ‘<specify-password-here>’;
for example-
mysql> create user ‘testinguser’@'%’ identified by ‘testingpassword’;
alternate method-
You can create through mysql database-
mysql> use mysql;
Database changed
mysql> insert into user (host,user,password) values (‘%’,'testinguser’,password(‘testingpassword’));
Query OK, 1 row affected (0.19 sec)
mysql> flush privileges;
11. Change password for a user-
mysql> set password for ‘user-name’@'hostname’ = password(‘specify-password-here’);
12. To assign database specific privileges-
All privileges to a particular database-
mysql> grant all privileges on `test` . * to ‘testinguser1′@’%’ with grant option ;
Specific privileges to a particular database-
mysql> grant select , insert , update , delete , create , drop , index , alter , on `fortest` . * to ‘testinguser’@'%’;
Alternate method-
mysql> insert into user (host,db,user,select_priv,insert_priv,update_priv,delete_priv,create_priv,drop_priv) values (‘%’,'specify-db-name-here’,'specify-user-name-here’,'y’,'y’,'y’,'y’,'y’,'y’);
mysql> use mysql;
Database changed
mysql> insert into user (host,db,user,select_priv,insert_priv,update_priv,delete_priv,create_priv,drop_priv) values (‘%’,'test’,'testinguser’,'y’,'y’,'y’,'y’,'y’,'n’);
13. To remove privileges for a particular user from a database-
mysql> revoke all privileges on `test` . * from ‘testinguser’@'%’;
14. To delete a particular table-
mysql> drop table `fortest` ;
15. To delete a particular database-
mysql> drop database `test` ;
16. Backup the database-
C:\MySQL\bin> mysqldump -u root -p <database-name> > C:\backup\test.sql
17. Backup particular table from the database-
C:\MySQL\bin> mysqldump -u root -p <database-name> <table-name> > C:\backup\fortest.sql
18. Restore a database from the backup-
C:\MySQL\bin> mysql -u root -p <database-name> < C:\backup\test.sql
…How to reset MySQL root password-
Lost your MySQL root password? Resetting MySQL root password is simple. Please follow these steps-
# Login to your MySQL server.
# Locate the mysql.ini file.
-This should be something like C:\MySQL\my.ini or “C:\Program files\MySQL\bin\mysqld-nt.exe” –defaults-file=”C:\Program files\MySQL\Data\my.ini” MySQL
-You can also check this by viewing the Properties of the MySQL service command line under the Services MMC.
# Edit the appropriate *.ini file and add the following line immediately after [mysqld] ;
skip_grant_tables = 1
# Restart the MySQL service. Please note that MySQL is now running unsecured.
# From a command prompt, change to the /bin directory (Ususally C:\MySQL\bin or whereever under MySQL installed location) and enter the following command to login as root:
mysql -u root
# Then input the following command:
update mysql.user SET Password = Password(‘newpassword’) WHERE User=’root’;
# Now remove the line you added to my.ini in previous step and restart MySQL.
# Make sure you can login to MySQL using the updated password.
…Important steps to secure Active Directory-
# Rename or disable the Administrator account (and guest account) in each domain to prevent attacks on your domains.
# Physically secure all domain controllers in a locked room.
# Manage the security relationship between two forests and simplify security administration and authentication across forests.
# To provide additional protection for the Active Directory schema, remove all users from the Schema Admins group, and add a user to the group only when schema changes need to be made. Once the change has been made remove the user from the group.
# Restrict user, group, and computer access to shared resources and to filter Group Policy settings.
# Avoid disabling the use of signed or encrypted LDAP traffic for Active Directory administrative tools.
# Some default user rights assigned to specific default groups may allow members of those groups to gain additional rights in the domain, including administrative rights. Therefore, your organization must equally trust all personnel that are members of the Enterprise Admins, Domain Admins, Account Operators, Server Operators, Print Operators and Backup Operators groups.
# Use global groups or universal groups instead of domain local groups when specifying permissions on domain directory objects replicated to the global catalog. For more information, see Global catalog replication.
…Active directory concepts in pictorial format-
click to enlarge the image
…Overview of FSMO Roles-
There are five different FSMO roles and they each play a different function in making Active Directory work:
PDC Emulator – This role is the most heavily used of all FSMO roles and has the widest range of functions. The domain controller that holds the PDC Emulator role is crucial in a mixed environment where Windows NT 4.0 BDCs are still present. This is because the PDC Emulator role emulates the functions of a Windows NT 4.0 PDC. But even if you’ve migrated all your Windows NT 4.0 domain controllers to Windows 2000 or Windows Server 2003, the domain controller that holds the PDC Emulator role still has a lot to do. For example, the PDC Emulator is the root time server for synchronizing the clocks of all Windows computers in your forest. It’s critically important that computer clocks are synchronized across your forest because if they’re out by too much then Kerberos authentication can fail and users won’t be able to log on to the network. Another function of the PDC Emulator is that it is the domain controller to which all changes to Group Policy are initially made. For example, if you create a new Group Policy Object (GPO) then this is first created in the directory database and within the SYSVOL share on the PDC Emulator, and from there the GPO is replicated to all other domain controllers in the domain. Finally, all password changes and account lockout issues are handled by the PDC Emulator to ensure that password changes are replicated properly and account lockout policy is effective. So even though the PDC Emulator emulates an NT PDC (which is why this role is called PDC Emulator), it also does a whole lot of other stuff. In fact, the PDC Emulator role is the most heavily utilized FSMO role so you should make sure that the domain controller that holds this role has sufficiently beefy hardware to handle the load. Similarly, if the PDC Emulator role fails then it can potentially cause the most problems, so the hardware it runs on should be fault tolerant and reliable. Finally, every domain has its own PDC Emulator role, so if you have N domains in your forest then you will have N domain controllers with the PDC Emulator role as well.
RID Master – This is another domain-specific FSMO role, that is, every domain in your forest has exactly one domain controller holding the RID Master role. The purpose of this role is to replenish the pool of unused relative IDs (RIDs) for the domain and prevent this pool from becoming exhausted. RIDs are used up whenever you create a new security principle (user or computer account) because the SID for the new security principle is constructed by combining the domain SID with a unique RID taken from the pool. So if you run out of RIDS, you won’t be able to create any new user or computer accounts, and to prevent this from happening the RID Master monitors the RID pool and generates new RIDs to replenish it when it falls beneath a certain level.
Infrastructure Master – This is another domain-specific role and its purpose is to ensure that cross-domain object references are correctly handled. For example, if you add a user from one domain to a security group from a different domain, the Infrastructure Master makes sure this is done properly. As you can guess however, if your Active Directory deployment has only a single domain, then the Infrastructure Master role does no work at all, and even in a multi-domain environment it is rarely used except when complex user administration tasks are performed, so the machine holding this role doesn’t need to have much horsepower at all.
Schema Master – While the first three FSMO roles described above are domain-specific, the Schema Master role and the one following are forest-specific and are found only in the forest root domain (the first domain you create when you create a new forest). This means there is one and only one Schema Master in a forest, and the purpose of this role is to replicate schema changes to all other domain controllers in the forest. Since the schema of Active Directory is rarely changed however, the Schema Master role will rarely do any work. Typical scenarios where this role is used would be when you deploy Exchange Server onto your network, or when you upgrade domain controllers from Windows 2000 to Windows Server 2003, as these situations both involve making changes to the Active Directory schema.
Domain Naming Master – The other forest-specific FSMO role is the Domain Naming Master, and this role resides too in the forest root domain. The Domain Naming Master role processes all changes to the namespace, for example adding the child domain vancouver.mycompany.com to the forest root domain mycompany.com requires that this role be available, so you can’t add a new child domain or new domain tree, check to make sure this role is running properly.
To summarize then, the Schema Master and Domain Naming Master roles are found only in the forest root domain, while the remaining roles are found in each domain of your forest. Now let’s look at best practices for assigning these roles to different domain controllers in your forest or domain.
To summarize these three rules then and make them easy to remember:
Forest root domain – Schema Master and Domain Naming Master on the same machine, which should also host the Global Catalog.
Every domain – PDC Emulator and RID Master on the same machine, which should have beefy hardware to handle the load.
Every domain – Never place the Infrastructure Master on a machine that hosts the Global Catalog, unless your forest has only one domain or unless every domain controller in your forest hosts the Global Catalog.
…PORT NUMBERS USED IN ACTIVE DIRECTORY SERVICES-
53 TCP Enable DNS TCP 53
53 UDP Enable DNS UDP 53
88 TCP Enable Kerberos TCP 88 (AD)
88 UDP Enable Kerberos UDP 88 (AD)
123 UDP Enable NTP UDP 123 (AD)
135 TCP Enable RPC TCP 135
135 UDP Enable RPC UDP 135
137 UDP Enable NetBIOS Name Service
138 UDP Enable NetBIOS Datagram Service
139 TCP Enable NetBIOS Session Service
389 TCP Enable LDAP TCP 389 (AD)
389 UDP Enable LDAP UDP 389 (AD)
445 TCP Enable SMB over TCP
464 TCP Enable K Password TCP 464 (AD)
543 TCP Enable K Login TCP 543 (AD)
544 TCP Enable K Shell TCP 544 (AD)
1025 TCP Enable MSRPC TCP 1025 (AD)
1026 TCP Enable 1026 TCP (AD)
3268 TCP Enable Global Catalog TCP 3268 (AD)
3268 UDP Enable Global Catalog UDP 3268 (AD)
53211 TCP Enable AD Replication TCP 53211 (AD)
53212 TCP Enable File Replication Service TCP
…Basic Questions about ADS 2003.
What is active directory?
Active Directory is the directory service included in the Windows Server 2003 family. Active Directory includes the directory, which stores information about network resources, as well as all the services that make the information available and useful. Active Directory is also the directory service included in Windows 2000.
Active directory database-
NTDS.Dit located in C:\Windows\ntds\
.Dit – Directory Information Tree.
Active Directory Schema-
The Active Directory schema defines objects that can be stored in Active Directory. The schema is a list of definitions that determines the kinds of objects and the types of information about those objects that can be stored in Active Directory. Because the schema definitions themselves are stored as objects, they can be administered in the same manner as the rest of the objects in Active Directory. Normally called schema object or metadata .
Structure of Active Directory-
1)Physical structure - Sites, Domain Controllers
2)Logical structures – Forest, Tree, Domain, OU
Domain functional levels in Active directory 2003?
1)Mixed mode
2)Native mode
3)Interim mode
What is Global catalog and GC server?
The global catalog is the central repository of information about objects in a tree or forest. By default, a global catalog is created automatically on the initial domain controller in the first domain in the forest. A domain controller that holds a copy of the global catalog is called a global catalog server.
Functions of GC-
A)It enables a user to log on to a network by providing universal group membership information to a domain controller when a logon process is initiated.
B)It enables finding directory information regardless of which domain in the forest actually contains the data.
Active directory database engine name?
ESE (Extensible Storage Engine)
Partitions available in AD-
i)Schema partition
ii) Configuration Partition
iii) Domain Partition
iv)Application Partition
Types of replications-
Inter-site(Site to site) and Intra-site(With in site) replications.
About KCC-
KCC is called Knowledge Consistency Checker. The KCC is a built-in process that runs on all domain controllers. The KCC configures connection objects between domain controllers. Within a site, each KCC generates its own connections. For replication between sites, a single KCC per site generates all connections between sites.
The 2 trust protocols 2003 using -
Kerberos V5 and NTLM
Types of Trust relations available in 2003-
Tree-Root , Parent- Child , Shortcut, Realm, Forest trust , External trust
What is the hierarchy of applying Gpo(Group Policy Object) in 2003?
It is applied from parent level to child level in AD.
i) Local GPO
ii) GPOs linked to sites
iii) GPOs linked to domains
iv) GPOs linked to OUs
Protocols used on replication-
RPC over IP (Used for synchronies transfer), SMTP over IP (Asynchronies transfer)
What is the default time delay on replication?
Intra site – 15 min ( KCC automatically create the topology for Replication)
Inter-site – 1 hrs.
Security related changes replicated immediately across sites.
What Different tables available in NTDS database?
i)Schema table
ii)Link Table
iii)Data table
iv)Configuration Table
Where is the FRS logs stored in and what is the database engine name?
C:\Windows\ntfrs\jet\log ,The engine used is jet database engine. Ntfrs.jdb.
What is tombstone object in AD? What is it’s life time?
Any objects deleted from Active directory will not removed from Database immediately. That object is called tombstone object. The default life time for that object is 60 days.For win 2k3 SP1 180 days
What are the FSMO roles in AD and what are the functionalities of those roles?
Every Active Directory forest must have the following roles:
1) Schema master 2) Domain naming master
These roles must be unique in the forest. This means that throughout the entire forest there can be only one schema master and one domain naming master.
Schema Master Role
The domain controller assigned the schema master role controls all updates and modifications to the schema. To update the schema of a forest, you must have access to the schema master. At any time, there can be only one schema master in the entire forest.
Domain Naming Master Role
The domain controller holding the domain naming master role controls the addition or removal of domains in the forest. There can be only one domain naming master in the entire forest at any time. Domain-Wide Operations Master Roles Every domain in the forest must have the following roles:
3)Relative identifier (RID), or relative ID, master
4) Primary domain controller (PDC) emulator
5) Infrastructure master
These roles must be unique in each domain. This means that each domain in the forest can have only one RID master, PDC emulator master, and infrastructure master.
RID Master Role
The domain controller assigned the RID master role allocates sequences of relative IDs to each of the various domain controllers in its domain. At any time, there can be only one domain controller acting as the RID master in each domain in the forest. Whenever a domain controller creates a user, group, or computer object, it assigns the object a unique security ID. The security ID consists of a domain security ID (that is the same for all security IDs created in the domain) and a relative ID that is unique for each security ID created in the domain. To move an object between domains (using Movetree.exe: Active Directory Object Manager), you must initiate the move on the domain controller acting as the RID master of the domain that currently contains the object.PDC Emulator
Note: For all Active directory administration, troubleshooting and Changes; please refer this link-
…Advantages of Windows 2003
1. Domains can be renamed or moved to a different level in an AD tree.
2. Schema attributes can be deleted as well as added.
3. Any Domain Controller can cache the Global Catalog thus preventing user logon problems if no Global Catalog server is available.
4. AD Replication can be set not to use compression.
5. Cross-Forest Transitive Trusts can be created.
6. Many administrative tools allow drag-and-drop and there are more configuration and management wizards.
7. Most services are disabled by default in 2003 instead of enabled as in Windows 2000.2003
allows partial synchronizations of the Global Catalog 2000 had always to have full synchronizations.
8. Support for IPv6. Ping and Tracert have extra IPv6 options.
9. Supports XML web services.
10. A new service called Volume Shadow Copy takes periodic snapshots of a hard drive making it easier to take backups and recover deleted files. Users can even be allowed to recover previous versions of files by themselves by using the Previous Versions client.
11. A Global Catalog server can be built from backup media instead of by replication.
12. IPSec Nat Traversal – NAT-T – allows IPSec VPN clients and servers to pass through NAT firewalls. This is likely to lead to the wider adoption of L2TP VPNs.
13. Distributed File System DFS has had significant improvements made to it. For example DFS replicas can now be prestaged to avoid excessive initial file replication.
14. Multiple DFS Roots per server can be created (Enterprise and Datacenter editions only).
15. Print queue redundancy can be achieved by storing them on multiple servers.
16. Active Directory Migration Tool v.2.0 can now migrate users, computers, groups and passwords from an NT domain and can also perform the cross-forest migration of objects.
17. Terminal Server allows clients to map their local drives and printers
18. The FTP server allows different default directories to be assigned to different users.
19. There’s a Security Configuration and Analysis tool to check a server’s security settingsDNS AD-integrated zones are stored in the Application Partition of a forest so aren’t replicated to domain controllers which aren’t DNS servers.
20. Regedit.exe and Regedt32.exe have been amalgamated into a single utility which takes the best features of each. Both files still exist but run the same utility.
21. The DNS server has added flexibility with the new options of stub zones and conditional forwarding.
22. Internet Information Server 6 (IIS 6) has the ability to keep worker processes from different websites and web applications separate so that if one application crashes then other websites running on the same server remain unaffected.
…IIS SMTP not available in IIS Snap-in-
Please make sure IIS SMTP is installed in the server. If you find it’s installed but not visible in IIS Snap-in can be fixed by registering the dll using this code-
regsvr32 C:\Windows\System32\inetsrv\smtpsnap.dll
or
regsrv32 %systemroot%\system32\inetsrv\smtpsnap.dll
Once done IIS SMTP virtual server node will be listed in IIS Snap-in.
…12 Best things to say if you are caught sleeping at ur desk-
#12. I’m in the management training program. I’m actually doing a Stress Level Elimination Exercise Plan (SLEEP) that I learned at the last mandatory seminar you made me attend.
#11. I wasn’t sleeping. I was trying to pick up my contact lens without hands.
#10. They told me at the blood bank this might happen.
#9. This is just a 15-minute power nap like they raved about in that time-management course you sent me to.
#8. Whew! Guess I left the top off the White-Out. You probably got here just in time.
#7. I wasn’t sleeping. I was meditating on the mission statement and envisioning a new paradigm.
#6. I was testing my keyboard for drool resistance.
#5. I was doing a highly specific yoga exercise to relieve work-related stress. Are you discriminating against people who practice yoga?
#4. Why did you interrupt me? I had almost figured out a solution to our company’s biggest problem.
#3. The coffee machine is broken…
#2. Someone must have put decaf in the wrong pot…
And the #1 best thing to say if you get caught sleeping at your desk:
#1. And, finally, I pray for the future of our company. Amen.
…
Blue – Rahman’s Bluish composition
Aaj Dil Gustakh Hai – Though Sukhwinder Singh had done a good job but it’s Shreya scored well with her cool voice and Rahman for his piano tunes.
Bhoola tujhe – Cool melody by Rashid Ali and hunky violin tones in the background which keeps you listen again and again.
Blue Theme – Blaaze, Raqeeb Alam, Sonu Kakkar, Jaspreet Singh, Neha Kakkar, Dilshad. It’s drummer Sivamani’s excellent turn. Surely it will pumps up your adrenaline and keeps you listen again and again.
Chiggy wiggy – Aussie pop icon Kylie Minogue’s voice is metallic and it’s her first song in indian cinema. Indian western type.
Fiqrana – A different beat with many instrumental tones in the background.
Rehnuma – Peculiar Rahmanish tune with Sonu Nigam and Shreya Ghoshal. Likable and lovely.
Yaar mila tha – Typical folk number by Udit Narayan and Madhushree. Nothing different.
Enjoy!!
Overall rating: [starreview tpl=16]
…Never compromise your values and beliefs,
even if it means riksing ridicule and rejection.
Be true to yourself.
Live your own life.
and don’t allow others
to decide what is best for you.
If you do you will be unhappy
because you are untrue to yourself.
…English to tamil java program translation-
public class Project
{
public static void main(String args[])
{
int a;
string b;
if(a==0)
{
b = “Zero”;
}
else
{
b = “Non-Zero”;
}
return;
}
}
Translated to Tamil-
பொது வகுப்பு கூடிகும்மிஅடிப்பு
{
பொது நிரந்திர ஒன்னும்மில்லா முக்கிய (கம்பி வாக்குவாதங்கள் [])
{
எங்கள் அ;
கம்பி அ;
ஒருவேளை (அ == 0)
{
அ= “பூஞ்சியம்”;
}
இல்லன்னா
{
அ= “பூஞ்சியம் இல்லை”;
}
போடா டேய்;
}
}
…
Recent Comments